Get Mold & Toxin News!

Subscribe to get the latest content by email and a free PDF on the top 10 signs of mold in your home.

Wishing everyone the opportunity to "Dwell Well!"

© Cheryl Ciecko, 2017

Cheryl Ciecko, AIA, ALA, LEED AP is a licensed architect who improves the health of people by helping them avoid toxin exposure in their buildings.  Cheryl also shares information on a variety of other potential toxin impacts affecting health, including food, products, water quality, and air quality.  Individual consulting is available upon request.


Follow Cheryl on LinkedIn, Twitter, and Facebook, or contact her by email at

More Questions?

Ask Cheryl yourself!

Will Mold Resistant Materials Stop Mold?

June 13, 2017

Materials are always a hot topic when discussing mold. But any materials-only focus when talking mold avoidance is misguided.  


Do mold resistant materials prevent mold in buildings?


Does avoiding bio-based materials ensure a mold-free environment?


Commercial buildings are mostly 'non-organic,' but more and more steel, concrete and masonry structures are proving to be highly toxic and moldy. Repairs and remediation often costs millions of dollars in these seeming 'mold-safe structures.'  We just aren't hearing about commercial buildings in blogs and websites focused on individuals, because then the focus of those is usually on our homes. Also, private commercial building owners have incentive to keep the problems quiet. It's only the public buildings that you will hear about, but the numbers are growing.


Google the Pensacola Florida judicial building for just one example. 



Mold-safe housing and buildings must be focused on moisture management, first and foremost. The moisture is the problem we can control - this is very complicated stuff! Building science for structures is not that different from medical science for people. Each situation is unique. Multiple systems are involved, and our outside influences keep evolving. Climate, use, weather events, budget, building codes, structural requirements, fire and energy requirements are all factors to contend with.

Steel and concrete also have their own challenges for health.


They actually have fire dangers, too. Steel, and especially light frame steel studs, lose strength very quickly due to high heat.  Steel-frame buildings are highly susceptible to catastrophic collapse due to fire. Therefore, steel frame buildings should always be protected by sprinkler systems.















Both steel and concrete materials act as very challenging 'thermal bridges,' which makes them highly susceptible to condensation. Water vapor in the air will condense on cold surfaces and turn back into bulk water, which can cause lots of damage to building materials. Have you seen a metal window frame sweat or water accumulate on the outside of a glass of ice water? This water accumulation is condensation on the cold surface created by warm, moist air hitting the surface, which then turns the water in the air into bulk water.



While it's true that mold doesn't use concrete and steel as a food source, themselves, mold can still grow on them with the food source being dirt and dust... which is everywhere. In concrete, 'on' can mean inside tiny air pockets throughout the material.  


Mold can, in fact, grow on any materials, even mold-resistant ones.

Therefore, building homes with concrete and steel to avoid mold will not likely be any more successful than using any other material.  Add in the additional costs to build with those materials exclusively, and even more expensive homes will follow the commercial buildings towards increased mold toxin contamination.  The solution to avoid mold toxins in buildings is to address MOISTURE.

Stop the moisture, including bulk water, water vapor and condensation, and plumbing leaks, and you stop mold growth. Ignore building science, quality building practices and adequate building maintenance, and moisture can, and will, accumulate somewhere.  Any building material can be a host for toxic mold and result in poor indoor air quality and health compromised occupants.






The information contained in this presentation is for educational purposes only and is not intended to diagnose, prescribe, treat, or cure any disease, ailment or injury to the body. It is not medical advice. FDA regulations prohibit the use of medical claims in conjunction with the sale of any product not approved by the FDA. Statements made herein have not been evaluated by the FDA.  

Any products, techniques, and/or personal usage tips referred to are not suggested as a replacement for proper treatment from a licensed health care professional. I am not a licensed health care professional and the decision to use or not to use any of this information is the sole responsibility of the listener and/or reader.

Everyone is an individual with different body types, different blood types, different body chemistries, and it is important to remember that what works for one person may not work for another person.



Looking for more information? Check out some of Cheryl's other tips and tricks!


The Mold Coating Myth


4 Tips for Proper Mold Remediation and 10 tips for Contaminants


11 signs of Water Damage


Moisture Meters to Find Mold


Please reload

Featured Posts


November 1, 2018

Please reload

Recent Posts

Please reload

Follow Cheryl
  • Facebook Classic
  • Twitter Classic
  • LinkedIn Social Icon
  • Pinterest Social Icon
Search By Tags